Using DNC Server in Standard Mode
To Send
a file:
First put the text file into the DNC window. Highlight a file in the
file list window. Press the Get button and the file will be sent to the
DNC window. You can also drag and drop from the file list to the edit
window.
To send the file to the machine,
first press the Send button. If the
communication protocol is set for handshaking, DNC Server will say its
waiting for the start signal from the machine control. Then go over to
the machine control and press the button for receive.
To interrupt the send, press the Stop
button or press Escape.
To
Receive a File:
Press the
Receive button.
Any text in the window will be cleared, and DNC Server will say its
waiting for the data. The Receive and Send buttons will de-activate and
the Stop button will show.. Anything received
will show up in the DNC-text window. Go to the machine control and send
out the program.
On machine controls that use XON/XOFF, DNC Server will know when the
file ends and will re-enable
the buttons. If it doesn't, then press the Stop button.
See also
End of File Receive
When it is finishes receiving all the text, press the
Save button and
choose the place and name you want to save to.
Overview
Procedure
for Sending and Receiving from DNC Server
Sending
to Machine :
1. Set Switch Boxes (if
used)
2. At DNC Server – Select Machine from the dropdown list.
3. If you need to go to a different directory, choose it from the left
drop down list.
4. Highlight file by clicking once on it.
5. Press the “Get” button to put it in the DNC window.
6. Press the “Send” button and will show “Waiting for Remote Start”
7. At Okuma, load file with CN0: , on Fanuc press Read.
Sending
from Machine to Computer:
1. Set Switch Boxes
(if used)
2. At DNC Server – Select correct machine from dropdown list
3. Press the “Receive” button – will say “Waiting for Data”
4. At Machine Punch program
5. At DNC Server – program will show up in window.
6. When finished receiving, Press “Save” button. (press Stop button if
Save button is not active)
7. Choose Directory and Filename to save to.
|
|
