Insert Arc

Insert Arc Button

When you pick an Arc with the CAM Button-Arc The Insert Arc button will insert the G02 or G03 move with the end point and I,J,K or R into the editor.

The Insert XY or XZ buttons hold the start point of the arc. You can insert the start point of the arc first with the Insert XY or XZ button and then the arc move with the Arc button.

Pick the arc near the end and side that you want to start at. It outputs G2 or G3 depending on what end and side was picked. Output of I,J,K or R depends on the config settings and on the arc itself.

_________________________________________________________________