Offsets

You can offset the plotting in Inplot by these metthods:

1. Use the comment code (TOF

Ex: (TOF Z3.0) will offset all the plotting 3.0 in the Z

Ex: (TOF X10.0Y10.0Z10.0) will offset all the plotting 10.0 in X,Y, and Z

2. If using Fanuc type control you can use the G10 command to load offsets into the G54-G59 work offsets. As in: G10 L2 P1 X1.0 Y1.0 Z1.0

In order to use the G10 command, Configuration - Machine - Code Format must be set Fanuc.

Configuration - Plotting - Offsets must be checked

_________________________________________________________________